Skip to content
Grochi · Neutral pet information from South Korea · English edition한국어
Grochi.English edition
Labels & regulation

Why and how to convert pet food to a dry matter basis (Korean labels)

Translated from the Korean edition · Editorial draft, not professionally reviewed. This page is an English translation of the Korean edition as checked on 2026-11-19. If the two differ, the Korean edition is the reference. 한국어판 (Korean edition)

Why and how to convert pet food to a dry matter basis (Korean labels)
Short answer

Moisture differs from food to food, so comparing the printed nutrient percentages directly gives a wrong picture. Converting with nutrient % ÷ (100 − moisture %) × 100 puts foods on a dry matter basis, with moisture removed, so they can be compared; this guide uses Korean labeling rules.

Key takeaways

  • Converting to a dry matter (乾物) basis means treating the weight left after removing moisture from the food as 100 and recalculating the nutrient percentages, so that dry and wet foods with very different moisture can be compared on the same scale.
  • The formula is: dry matter basis nutrient % = printed nutrient % ÷ (100 − moisture %) × 100.
  • Printed values are guarantees in a min. or max. form, so the converted result is an approximation, and it is hard to rank products by differences after the decimal point.
  • When comparing products with different energy density, an energy basis (for example, g per 1,000kcal) can be more accurate than a dry matter basis.

What is dry matter basis conversion, and why do it?

Dry matter basis conversion is a calculation that leaves the moisture in the food out and, treating the remaining dry portion (dry matter) as 100, works out again what percentage each nutrient makes up. In English it is called dry matter basis, abbreviated DMB or DM basis.

Conversion is needed because the share of water differs greatly from food to food. The US Food and Drug Administration (FDA) explains that the guaranteed analysis on a pet food label is on an as-fed basis, that is, with the moisture included, and that canned (wet) products are usually 75–78% moisture while dry foods are usually around 10–12%. Water is neither protein nor fat, so a product with a lot of water shows a smaller printed percentage even when it holds the same amount of nutrients.

So for products with nearly the same moisture (for example, dry versus dry, or canned versus canned) comparing the printed values as they are is not a big problem, but when comparing products with different moisture, such as dry and wet, the values must first be put on a dry matter basis. This guide is general information explaining the calculation method and its limits, and it does not judge which product is better.

What is the formula, and what does an example with hypothetical numbers look like?

The calculation has three steps. First, find the dry matter ratio: subtract the moisture % printed on the food from 100. Second, divide the nutrient % you want by that dry matter ratio. Third, multiply by 100. In one line: dry matter basis nutrient % = nutrient % ÷ (100 − moisture %) × 100. The FDA and the Merck Veterinary Manual explain it in the same order.

The numbers in the table below are hypothetical examples made up in this guide for calculation practice, and they are not the values of any actual product. Three types are assumed: a dry type (moisture 10%), a semi-moist type (moisture 30%), and a wet type (moisture 80%).

As the table shows, the printed crude protein (조단백질) is largest for the dry type at 26% and smallest for the wet type at 8%, but on a dry matter basis, with the moisture removed, the wet type comes out largest at 40.0%. If you judged by the printed values alone, the order would be reversed. This is why comparing dry and wet foods by their printed values gives a wrong result because of the difference in moisture.

Fat is calculated the same way. The hypothetical dry type is 14% ÷ 90 × 100 = 15.6%, and the hypothetical wet type is 5% ÷ 20 × 100 = 25.0%. To do it without a calculator, it helps to remember that when moisture is 80% the dry matter is 20%, so you can simply multiply the printed value by 5.

Dry matter basis conversion calculated with hypothetical example numbers (not values of actual products)
TypePrinted crude protein (%)Printed moisture (%)Dry matter ratio (%)Dry matter basis crude protein (%)
Hypothetical dry type26109026 ÷ 90 × 100 = 28.9
Hypothetical semi-moist type15307015 ÷ 70 × 100 = 21.4
Hypothetical wet type880208 ÷ 20 × 100 = 40.0

Where do you find moisture on a Korean label?

Appendix 4 (labeling items and methods on containers and packaging) of the Enforcement Rule of the Control of Livestock and Fish Feed Act (사료관리법) lists, as labeling items for compound feed, the feed's component registration number, name and form, guaranteed analysis (registered) (등록성분량), names of the raw materials used, actual weight, manufacture date and sell-by date, and so on. Among these, the guaranteed analysis (registered) is where a pet owner (guardian) reads the nutrient numbers on the package.

Which nutrients appear in the guaranteed analysis (registered) is set out in Appendix 13 (component registration items for compound feed) of the Standards and Specifications for Feeds (사료 등의 기준 및 규격), a Ministry of Agriculture, Food and Rural Affairs (MAFRA) public notice. Under the pet animal (companion animal) feed entry in this appendix, the registered components are crude protein (조단백질), crude fat (조지방), calcium, phosphorus, crude fiber (조섬유), crude ash (조회분) and moisture, and moisture is set at 14% max. A note also states that to register components with moisture above that limit, the reason and related documents must be submitted to the Mayor/Do Governor, and the criteria of Appendix 10-2 (setting of the distribution period) must be met. So even for a product with high moisture, the moisture figure must be within the guaranteed analysis (registered), which means the value needed for dry matter basis conversion can be found on the package.

Also, Appendix 15 (other labeling items for feed) requires feed that is likely to spoil or deteriorate after opening, such as compound feed with moisture above 14%, to carry wording to the effect of refrigerating after opening or using it quickly. The moisture figure is therefore a clue not only for dry matter conversion but also for reading the storage method.

Within the scope checked in writing this guide, the Korean notice and enforcement rule do not require a dry matter basis value to be printed separately on the package. The dry matter basis value is something the pet owner calculates directly from the printed values.

What is the limit of printed values being approximations?

A dry matter basis conversion result should be read as an approximation, not an exact measurement. The biggest reason is that the numbers on a label are guaranteed values.

The Association of American Feed Control Officials (AAFCO) explains that in the guaranteed analysis, crude protein and crude fat must be given as minimums, and crude fiber and moisture as maximums. Appendix 13 of the Korean notice also has minimum and maximum columns, so the guaranteed analysis (registered) is generally written in a min. or max. form. However, which nutrient is given in which direction has to be checked on the package of each product, and this guide did not check every nutrient.

Protein given as a minimum means the food actually contains at least that value, and moisture given as a maximum means it is actually at or below that value. The conversion formula, however, uses protein in the numerator and 100 minus moisture in the denominator. If the actual protein is higher than printed, the result goes up, and if the actual moisture is lower than printed, the denominator gets larger and the result goes down. Because the two errors point in different directions, it cannot be said whether the converted value is higher or lower than the real one.

There are other limits. Crude protein and crude fat are values obtained by an analytical method and do not tell you how well the food is digested or its amino acid makeup. Also, a high dry matter basis value does not mean the food is nutritionally more suitable. So rather than ranking products by small differences such as 28.9% versus 29.3%, it is appropriate to use the conversion as a tool to roughly check whether there is a large difference.

When is an energy basis comparison more accurate?

A dry matter basis removes the difference in moisture, but it does not remove the difference in energy density. A product with more fat has more energy even in the same 1kg of dry matter, and since the amount an animal eats in a day is set by energy, the amount of nutrients actually consumed can differ even when the dry matter basis ratios are the same. In such cases, comparing on an energy basis, for example grams of the nutrient per 1,000kcal of metabolizable energy (ME), is more accurate.

The Merck Veterinary Manual explains that when comparing different types of food, the comparison should be made on a dry matter basis or an energy basis. AAFCO also states that calorie content is shown as kcal per kg of food (on an as-fed basis) and in familiar units such as cups. If a calorie statement is present, the calculation can be done.

The method is to multiply the printed nutrient % by 10 to get g per 1kg of food, divide that by the kcal per 1kg of food, and then multiply by 1,000. The table below is an example calculated with hypothetical numbers assumed in this guide. The hypothetical dry type has crude protein 26% and 3,600kcal/kg, and the hypothetical wet type has crude protein 8% and 900kcal/kg. The dry type is 260g ÷ 3,600 × 1,000 = about 72.2g, and the wet type is 80g ÷ 900 × 1,000 = about 88.9g.

On a dry matter basis the gap was more than 10 percentage points, at 28.9% versus 40.0%, but on an energy basis the gap shrank a lot. This is because the energy density differs: the hypothetical wet type has 4,500kcal per 1kg of dry matter (900 ÷ 0.2) and the dry type has 4,000kcal (3,600 ÷ 0.9). The meaning and estimation of calorie statements are covered in a separate guide, and if calories are not shown on a Korean package, this calculation cannot be done.

The same hypothetical numbers compared on a dry matter basis and an energy basis (not values of actual products)
TypeDry matter basis crude protein (%)Calorie statement (kcal/kg)Crude protein per 1,000kcal (g)
Hypothetical dry type28.93,600about 72.2
Hypothetical wet type40.0900about 88.9

What steps can a pet owner follow to check this directly?

The first step is to find moisture in the guaranteed analysis (registered) on the package, and to find the nutrient you want to compare in the same place. After that, you can check in the following order.

  • First look at the moisture statements of the two products. If the difference is within a few percentage points, comparing the printed values as they are is not far off.
  • If the moisture difference is large, divide each nutrient % by 100 minus moisture, then multiply by 100.
  • Check the min. or max. wording. A nutrient given as a minimum may actually be higher, and remember that the converted value is an approximation.
  • If a calorie statement is present, also convert the nutrient to g per 1,000kcal. This is especially useful when energy density differs a lot.
  • Compare only the same kind of nutrient: crude protein with crude protein, crude fat with crude fat.

In short, conversion can be done using only the numbers already printed on the package, and no special tools are needed. Use the resulting numbers as material for organizing your questions, not as a conclusion that one product is better.

Items to check before dry matter basis conversion
Item to checkWhere to find it on the packageWhy check it
Moisture (%)Guaranteed analysis (registered) (component registration items)Needed to find dry matter ratio = 100 − moisture
Nutrient to compare (%)Guaranteed analysis (registered)To check whether it is in a min. or max. form
Calories (kcal/kg)Calorie statement (if present)Needed for the g per 1,000kcal comparison
Product form and target animalFeed name and form, intended useTo compare the same target and the same use

What are common misunderstandings about dry matter basis, and when should you ask?

The first misunderstanding is the idea that a higher dry matter basis value means a better food. A dry matter basis is only a calculation method for comparing with moisture matched, and it holds no information such as digestibility, quality of ingredients, or the amount an animal needs.

The second misunderstanding is to assume that wet food has more or fewer nutrients. As in the hypothetical example above, a printed value can be low yet come out high on a dry matter basis, and the opposite can also happen. Either way it differs from product to product, so you have to calculate it.

The third misunderstanding is that a dry matter basis must be legally printed on the label. As seen above, within the scope checked in the Korean notice and enforcement rule, the pet owner calculates it directly.

The fourth misunderstanding is to use the converted value directly for calculating the feeding amount. How much to feed depends on the animal's age, weight, activity level and health condition, so this guide gives no dosage or feeding amounts.

In the following cases, do not rely on the calculation results and ask instead. For animals with a disease or on a prescription diet, animals that are pregnant, nursing or growing, and animals losing or gaining weight, consult a veterinarian at an animal hospital. If moisture or calories are not visible on the package or the values seem doubtful, check with the manufacturer's (importer's) customer service. Questions about labeling can be directed to the relevant city/province (Si/Do) or the feed department of the Ministry of Agriculture, Food and Rural Affairs.

Frequently asked questions

Q Can you give the dry matter basis conversion formula in one line?

Dry matter basis nutrient % = printed nutrient % ÷ (100 − moisture %) × 100. For example, with printed protein 24% and moisture 12%, 24 ÷ 88 × 100 = about 27.3%. This number follows the same method as the calculation example explained in the Merck Veterinary Manual.

Q If the moisture is similar, do I not need to convert?

If the moisture statements are nearly the same, comparing the printed values as they are does not make a big difference. The FDA also gives the example that canned products with the same moisture can be compared without conversion. However, since the conversion is simple, it is safer to do it when moisture differs by a few percentage points or more.

Q If the printed moisture is 14% max. or less, is conversion meaningless?

No. Appendix 13 of the Korean notice sets moisture of pet food at 14% max. while also having a separate procedure for registering above the limit, and a product with 10% moisture and one with 14% moisture still have different dry matter ratios, 90% and 86%. If the difference is small, the converted result simply differs a little.

Q Which is better, a dry matter basis or an energy basis?

It cannot be said that either one is always better. A dry matter basis matches only moisture, while an energy basis also matches the difference in energy density. If a calorie statement is present, calculate both, and when comparing products with very different energy density, it is good to refer to the energy basis.

Q Can I use the converted value to pick a food that suits my animal?

The converted value alone cannot be used to pick a suitable food. It is only the nutrient numbers on the package moved onto the same scale, and it does not reflect digestibility, quality of ingredients, or the health condition of the individual animal. For choosing a diet, it is good to consult a veterinarian who knows the animal's age, weight and health condition.

Q How do I find carbohydrates?

Carbohydrates do not always appear in the Korean guaranteed analysis (registered). This guide did not cover carbohydrate calculation and does not give a calculation method that was not checked. Convert only the nutrients shown on the package, and it is good to ask the manufacturer about values that are not shown.

Limits and scope of this guide

All the numerical examples in the text are hypothetical values for calculation practice and have nothing to do with actual products. Which of the minimum or maximum amount each nutrient is given as in Appendix 13 of the Korean notice differs by product and was not fully checked, and the statement that there is no obligation to print a dry matter basis is limited to the scope of the laws and regulations opened for this guide. The detailed numbers for the dry matter basis and the per 1,000kcal basis in AAFCO's nutrient profile tables, and the FEDIAF and WSAVA materials, were not checked and are not used. Feeding decisions suited to an individual pet's condition are not covered.

Translated from the Korean edition · Editorial draft, not professionally reviewed. The Korean edition is an explainer newly written from public sources; it is not a full translation of those sources. Veterinary expert review has not been completed. For decisions about your pet's health, talk to a veterinarian who knows your pet.

Sources and check dates

  1. Enforcement Rule of the Control of Livestock and Fish Feed Act, Appendix 4: labeling items and methods on containers and packaging (사료관리법 시행규칙 [별표 4] 용기 및 포장에의 표시사항 및 표시방법) ↗

    Used as the basis that the guaranteed analysis (registered) and other items must be printed on compound feed packaging (Appendix 4).

  2. Standards and Specifications for Feeds (사료 등의 기준 및 규격) [Appendix 13, Appendix 15] ↗

    Used as the basis that moisture is among the registered components of pet feed, with a 14% max. standard and a procedure when it is exceeded (Appendix 13), and for the refrigerate-after-opening wording when moisture exceeds 14% (Appendix 15).

  3. "Complete and Balanced" Pet Food ↗

    Used as the basis that the label's guaranteed analysis includes moisture, for the moisture ranges of canned and dry foods, and for the 3 conversion steps.

  4. Dog and Cat Foods (Merck Veterinary Manual, Professional Version) ↗

    Used as the basis for the dry matter basis conversion formula, the calculation example with protein 24% and moisture 12%, and the explanation that comparison is made on a dry matter or energy basis.

  5. Reading Labels (Understanding Pet Food) ↗

    Used as the basis for explaining how the guaranteed analysis is given as minimums and maximums and how calories (kcal/kg) are stated.

Korean edition checked · translated · each source may have a different check date. No paid partnerships.

This guide relies on 2 Korean laws or notices. Current effective dates and upcoming amendments are listed on Korean law check status. This is not legal advice.