Skip to content
Grochi · Neutral pet information from South Korea · English edition한국어
Grochi.English edition
Labels & regulation

How do I read the guaranteed analysis (registered)? Crude protein, fat, fiber and ash

Translated from the Korean edition · Editorial draft, not professionally reviewed. This page is an English translation of the Korean edition as checked on 2026-11-19. If the two differ, the Korean edition is the reference. 한국어판 (Korean edition)

How do I read the guaranteed analysis (registered)? Crude protein, fat, fiber and ash
Short answer

In a South Korean guaranteed analysis (registered), min. is a minimum guarantee and max. is a maximum guarantee, so the figure is one end of the permitted range, not the actual content. “Crude” refers to the analytical method, and moisture differs between foods, so they are hard to compare directly.

Key takeaways

  • Attached Table 4 of the Enforcement Rule of the Control of Livestock and Fish Feed Act (사료관리법 시행규칙) in Korea requires the guaranteed analysis (registered) to be written as a percentage (%), with min. attached to a minimum amount and max. to a maximum amount, so min. is a guarantee of not falling below that figure and max. is a guarantee of not exceeding it.
  • The “crude” in crude protein, crude fat, crude fiber and crude ash does not describe the quality of the nutrient. It means a proximate-analysis figure measured by the standard feed analysis methods, and neither how well the nutrient is digested nor the quality of the ingredients is contained in the number.
  • The guaranteed analysis is a percentage of the product as it is, with moisture included (as-fed basis), so numbers must not be compared as they are between products with different moisture, such as dry food and wet food, and have to be converted to a dry matter basis with the moisture removed.
  • The guaranteed analysis of the US AAFCO system also lists crude protein and crude fat as minimums and crude fiber and moisture as maximums, so the structure is similar, but which items are listed and in which direction is set by each country's law.
  • The analysis panel alone cannot show the quality of the ingredients, digestibility, calories, the amount to feed, or whether the food suits an individual animal, so contacting the manufacturer and consulting an animal hospital are necessary.

What is the guaranteed analysis (registered), and what do min. and max. mean?

The guaranteed analysis (registered) is the table of ingredient guarantees printed on pet food packaging. It is the table commonly called the guaranteed analysis. Attached Table 4 of the Enforcement Rule of the Control of Livestock and Fish Feed Act (사료관리법 시행규칙) includes the registered guaranteed analysis in the labeling items for compound feed, and provides that, under Article 12(1) of the Control of Livestock and Fish Feed Act (사료관리법), the registered ingredient names and amounts are shown, the amounts are shown as a percentage (%), and min. is shown for a minimum amount and max. for a maximum amount (Enforcement Rule of the Control of Livestock and Fish Feed Act (사료관리법 시행규칙), Attached Table 4).

Read out, this sentence works as follows.

  • Crude protein 25% min.: this is the value the manufacturer has registered and promised, that the product's crude protein will not fall below 25%. The actual value may be 25%, or it may be higher.
  • Crude fiber 4% max.: this is the value promised, that the product's crude fiber will not exceed 4%. The actual value may be 4%, or it may be lower.

In other words, the number in the table is not a single measured point but the boundary line of the guaranteed range. An item written as min. is the lower boundary, and an item written as max. is the upper boundary. It is normal for both notations to appear together in one table.

Registration is decided by the manufacturer, so which items use min. and which use max. can differ from food to food. For that reason, do not look at the number alone, and always read the min. or max. attached after it. Even for the same 8%, 8% min. and 8% max. are entirely different promises.

For reference, Attached Table 4 of the Enforcement Rule sets the precautions to be shown at the bottom of the guaranteed analysis table, and this provision is one place to see why the analysis panel and the cautionary text sit close together on packaging.

What does “crude” mean in crude protein, crude fat, crude fiber and crude ash?

“Crude” (粗, 조 in Korean) means coarse. It does not mean that the quality of the nutrient is coarse. It means a value measured all at once by a set chemical analysis procedure, without precisely sorting out individual compounds. The explanatory page of the Association of American Feed Control Officials (AAFCO) likewise explains that crude refers to the method of analysis and not to the quality of the nutrient (AAFCO labeling requirements page).

Attached Table 25 (Standard Analysis Methods for Feeds) of the Korean public notice deals, in its proximate-analysis chapter, with moisture, crude protein, crude fiber, crude fat, crude ash and nitrogen-free extract in that order. An outline only of the procedures written in that attached table is as follows.

  • Moisture: the loss-on-heating method is listed first. The sample is dried in a constant-temperature dryer at 135±2°C for 2 hours, or at 105–110°C until the weight no longer changes, and the weight lost is taken as moisture.
  • Crude protein: the Kjeldahl method is listed. It is a procedure in which the sample is decomposed with sulfuric acid, distilled, collected in a boric acid solution and quantified.
  • Crude fat: the ether extraction method is listed. Fat is extracted with ethyl ether in a Soxhlet apparatus at 80°C for 8 hours and weighed. For expanded (extruded) feed, the acid hydrolysis ether extraction method is provided separately.
  • Crude fiber: the sample is boiled for 30 minutes each in 5% sulfuric acid and 5% sodium hydroxide solution and filtered, the remaining residue is dried, and the value is found by burning it at 600°C and subtracting the weight of the ash that remains.
  • Crude ash: the sample is burned in a 600°C electric furnace for 2 hours, and the weight of the inorganic matter that remains is measured as a ratio to the sample weight.

Knowing these procedures makes it possible to gauge what the numbers say. For example, crude fiber is the part that remains after boiling in acid and alkali, so it does not mean all of the fiber in the food. The Merck Veterinary Manual explains that crude fiber measures only insoluble fiber and does not include soluble fiber. Crude ash is all of the inorganic matter that remains after burning, so it is a combined indicator of minerals such as calcium and phosphorus, not the amount of any particular mineral.

Meanwhile, the same attached table states that nitrogen-free extract (NFE) is not measured directly but is found by subtracting the percentages of moisture, crude protein, crude fat, crude fiber and crude ash from 100, and explains that its main components are soluble sugars and starch. It is enough to know that, even when NFE is absent from the table, there are parts that can be roughly gauged in this way.

Which ingredients are registered in Korea, and how accurate must the labeled values be?

The items registered for pet food are set out in Attached Table 13 of the public notice (registered ingredient items for compound feed). For the companion-animal category, it says that the manufacturer sets the feed name and range of use for each animal by growth stage and may subdivide them by breed, body weight and purpose (complete food or treat), and the registered ingredients listed are crude protein, crude fat, calcium, phosphorus, crude fiber, crude ash and moisture, with moisture marked as 14% max. When registering above the moisture standard, it says the reason and related materials must be submitted to the provincial governor or mayor and the standard of Attached Table 10-2 (setting the distribution period) must be met (Standards and Specifications for Feeds (사료 등의 기준 및 규격), Attached Table 13). This is what bears on why wet products and the like have much higher moisture. This article could not confirm which side the minimum and maximum columns of the attached table take for each item, so which items are min. and which are max. must be read directly from each product's packaging.

The difference between the labeled value and the actual value is also set. Attached Table 13-2 of the public notice says that the registered ingredients of compound feed must be within the permitted range of the formulation design value or the analyzed value, and gives within ±20% as a recommended standard. It says the minimum (items marked min.) can be set at 120% or less where possible and the maximum (items marked max.) only down to 80% where possible, and gives the calculation that a feed designed and analyzed at 30% crude fat is registered with a guaranteed analysis of 24.00–36.00%. It says registration is, by default, to the first decimal place, rounded at the second (Standards and Specifications for Feeds (사료 등의 기준 및 규격), Attached Table 13-2).

The detailed labeling standard of Attached Table 15 then states that if, under Attached Table 4 of the Rule, the guaranteed analysis (registered) is set as a minimum (min.), the actual measured value must be at or above the labeled value, and if it is set as a maximum (max.), it must be at or below the labeled value. However, even if the actual measured value falls outside that range, it says it is not regarded as deviating from the labeled amount if it is within the tolerance of Attached Table 4 of the Feed Inspection Standards (Standards and Specifications for Feeds (사료 등의 기준 및 규격), Attached Table 15). In summary, the law contains the direction that a min. label must not be missed on the downside and a max. label must not be missed on the upside, and in addition there is a separate margin that allows for analytical error.

Attached Table 13 also has an exception: for a product whose ingredients cannot be blended homogeneously, ingredient registration is made but registration of the guaranteed analysis and the product labeling of it may be omitted, and in that case the condition is attached that 5 or more ingredient names and their contents must be shown. If some product's packaging shows no ingredient amount table, this may be the circumstance, but the specific judgment must be confirmed with the manufacturer.

The above is the standard currently in force. Separately, a revised labeling standard applying to dog and cat food is due to take effect in September 2028. Dailyvet reported that at an industry briefing held in 2026, the content of the public notice was introduced, including the main labeling items for pet food such as the type of food, product name, ingredients used, guaranteed analysis (registered) and net contents, as well as the label position and type size, and that a remark was made that, to label a food as complete feed, ingredient analysis confirming whether it meets the Nutrient Standards for Pet Food (dogs and cats) is important (Dailyvet). It was confirmed only that the guaranteed analysis (registered) remains among the labeling items, and how the min. and max. notation or the items will change could not be confirmed. A possible change in the effective date has also been reported, so until it takes effect, the current rules described above can be used as the basis for reading.

How should I look at moisture, calcium and phosphorus, and what is dry matter basis?

Moisture is the proportion of water mixed into the food. The percentages of all other ingredients are percentages of the weight of the product as it is (as-fed), so in a product with high moisture the same amount of another ingredient appears as a lower number. The Merck Veterinary Manual example compares a dry food with crude protein 24% min. and moisture 12% max. against a canned food with crude protein 8% min. and moisture 82% max., and on a dry matter basis with moisture excluded they become about 27.3% and about 44.4% respectively, so the order of the numbers is reversed. The manual explains that products of different forms should be compared on a dry matter basis or a calorie basis. The calculation divides the percentage of the ingredient by the value found by subtracting the moisture percentage from 100, and the detailed working is covered in a separate article (dry matter basis conversion).

Calcium and phosphorus are items listed among the registered ingredients for companion animals in Attached Table 13 of the public notice, and Attached Table 25 of the public notice separately lists analysis methods for calcium (Ca) and phosphorus (P) in its mineral chapter. If crude ash is the total of minerals, calcium and phosphorus are the values for individual elements among them, measured separately. The ratio between the two elements is known to be important, but the appropriate ratio and the required amounts differ with the species, age and health condition of the animal, so this article gives no figures.

One more point: the value in the table is the guaranteed value for one product at one time, so the actual value may differ slightly by manufacturing date or batch. The permitted range in the previous section speaks to exactly that width. If the difference between two products' numbers is about 1–2 percentage points, it is safer to keep in mind that the order can reverse within the margin of the guaranteed values.

How does this differ from the US AAFCO guaranteed analysis notation?

In the United States, a table of the same nature is used under the name guaranteed analysis. The AAFCO labeling requirements explanation page says this table lists the percentage of each nutrient, and that crude protein and crude fat as minimums and crude fiber and moisture as maximums are always required. It also says that making nutrient-related claims may require additional guarantees, and that manufacturers may voluntarily list other nutrients as well (AAFCO labeling requirements page). The Merck Veterinary Manual likewise explains that the guaranteed analysis lists minimum crude protein and crude fat and maximum moisture and crude fiber on an as-fed basis, and speaks of the limits of the guarantee, not the actual amounts.

What overlaps with Korea is the structure of dividing the direction into min. (minimum) and max. (maximum). The differences can be summarized as follows.

  • Composition of items: in the United States the four above are introduced as the items required by default, while the registered ingredients for companion animals in Attached Table 13 of the Korean public notice are crude protein, crude fat, calcium, phosphorus, crude fiber, crude ash and moisture.
  • Legal framework: AAFCO states that it does not regulate or approve feed and that it produces model wording that state governments and others may adopt into law (AAFCO consumer guidance page). The US FDA's pet food page also explains that regulation is divided into two levels, federal and state, and that states often refer to the AAFCO model. In Korea, the Control of Livestock and Fish Feed Act (사료관리법) and the public notice directly set registration and labeling.
  • Tolerance: in Korea, the registration range and tolerance are written in Attached Tables 13-2 and 15 of the public notice. The details of US tolerance are not in the materials checked for this article, so they are not covered.

European notation was not confirmed for this article, so it is not compared. Packaging of imported products carries Korean labeling separately (Attached Table 15 of the public notice has provisions related to labeling of imported feed), so it is better not to carry over the way of reading an overseas label directly to Korean products.

What should I check on the packaging?

Reading the guaranteed analysis (registered) in the order below reduces mistakes. The table has no function for evaluating a particular product, so it is right to use it only as a list of things to check. Each line of the table below organizes, one line at a time, where to look on the packaging and how to read it, and it is not a standard for judging whether a product is good or bad but a checking order for reading the numbers without misunderstanding. The analysis panel is usually on the information-display side of the packaging, and the manufacture date, sell-by date and precaution text are often placed close to it, so look at them together. If the label text is hard to read or the numbers seem to contradict each other, the surest way is to keep a photo of the whole package and ask the manufacturer.

Order for checking the guaranteed analysis (registered)
Item to checkHow to read itPoint to note
Min. or max.Read the notation after the number firstMin. is the minimum guarantee, max. is the maximum guarantee
MoistureFind the moisture value in the tableIf moisture differs, do not directly compare the numbers of other ingredients
Crude protein and crude fatCheck each value and its directionCrude refers to the analytical method and does not mean the quality of the ingredients
Crude fiber and crude ashCheck each value and its directionCrude fiber is a value centered on insoluble fiber, and crude ash is the mineral total
Calcium and phosphorusSee whether they are shownRequired amounts differ by animal, so this is a matter for consulting a veterinarian
Purpose and intended animalLook at the feed purpose and the target animal shown on the packagingDo not judge whether a food is complete feed from the ingredient numbers alone
Manufacture date and sell-by dateLook at the dates on the same side as the analysis panelThe analysis panel looks the same even after the dates pass, so check the dates separately

What can the analysis panel not tell me, and what are the common misunderstandings?

The guaranteed analysis (registered) is necessary but not sufficient information. What the analysis panel alone cannot tell you is as follows.

  • Digestibility and ingredient quality: even for the same crude protein number, which ingredients it came from and how well it is digested does not show in the number. The World Small Animal Veterinary Association (WSAVA) also advises that an ingredient list alone cannot give information on ingredient quality.
  • Calories: the guaranteed analysis (registered) does not contain calories. Calorie labeling is covered in a separate article (calorie labeling).
  • Amount to feed and suitability for the individual: the analysis panel does not say how much to feed which animal.
  • Actual content: a min. value is a minimum guarantee so the actual value may be higher, and a max. value is a maximum guarantee so the actual value may be lower. The Merck Veterinary Manual explains that a product labeled 25% min. usually contains more than that.
  • Nutritional balance: even if the numbers are similar, whether a product is complete feed, or a treat or supplementary food, is confirmed from the purpose label, not from the numbers in the table (the meaning of the complete feed label is covered in a separate article).

Some common misunderstandings are also sorted out here.

  • The idea that a food with high crude protein is a good food: the fact that a number is high does not by itself allow judging quality, and the required amount differs with the animal's condition.
  • The idea that a max. figure is the actual content: max. is a limit that the value will not exceed.
  • The idea that crude fiber is all of the fiber in the food: as seen earlier, it is a value that measures only the part defined by the analytical method.
  • The idea that crude ash is the amount of additives: it is a value that also includes all the minerals contained in the ingredients themselves.
  • The idea that having an analysis panel finishes the comparison: if moisture differs, the meaning of the numbers differs.

Where should I ask in these cases?

If questions come up while reading the analysis panel, it is better to divide where you ask according to the purpose.

  • When the packaging label looks wrong (the numbers are faint, the analysis panel is missing, or the purpose is unclear): first ask the consumer service desk of the manufacturer or importer. Keeping a photo of the packaging together with the manufacture date, sell-by date and the ingredient registration number speeds up the check.
  • When a labeling violation is suspected: under the Control of Livestock and Fish Feed Act (사료관리법) system, labeling inspection and correction are handled by the local government with jurisdiction and government agencies, so you can ask the competent authority with the product information.
  • When the animal has a particular illness or is on a controlled diet, or when changes in appetite, weight, stool, coat or skin continue: do not try to interpret the food numbers yourself, and get an examination and diet consultation at an animal hospital. The required amount and suitable diet are judged by a veterinarian looking at the individual's condition.
  • Changing the diet of a young animal, a pregnant or nursing animal, or a senior animal: this article is general guidance, so consult a veterinarian for individual judgment.

The numbers and rules in this article are based on the laws and materials checked on 2026-11-19, and laws may be revised. Before a purchase or feeding decision, check the latest law and the product packaging label again.

Frequently asked questions

Q If it says crude protein 25% min., does the food actually contain 25%?

It cannot be taken that way. Min. is a minimum guarantee of not falling below that figure, so the actual value may be 25% or higher. Attached Table 15 of the Korean public notice states the direction that the actual measured value must be at or above the labeled value.

Q Does crude fiber 4% max. mean the food contains 4% fiber?

No. Max. is a maximum guarantee of not exceeding 4%. The actual value may be 4% or lower.

Q Does the word “crude” mean the quality is low?

No. Crude means a value measured all at once for the proximate components by a set analysis procedure. AAFCO also explains that crude refers to the method of analysis, not the quality of the nutrient.

Q Can I directly compare the crude protein numbers of wet food and dry food?

That is not recommended. The guaranteed analysis (registered) is a percentage with moisture included, so a product with high moisture shows lower numbers. A fair comparison requires converting to a dry matter basis with the moisture removed, and in the Merck Veterinary Manual example the order is even reversed.

Q If the numbers on the packaging differ slightly from a test result, is that a violation?

Analysis has error, and the Korean public notice states that a result within the tolerance of Attached Table 4 of the Feed Inspection Standards is not regarded as deviating from the labeled amount. The basic direction is that min. must not be missed below the labeled value and max. must not be missed above it. The specific judgment is made by the competent authority.

Q What should I do if the analysis panel has no calories?

The guaranteed analysis (registered) does not contain calories. Manufacturers sometimes state calories separately, so ask the manufacturer, and if weight management is needed, consult an animal hospital.

Q Is the guaranteed analysis on a US label the same as the Korean guaranteed analysis (registered)?

They are similar in nature. Both are ingredient guarantee tables written divided into minimum and maximum. However, the required items, legal framework and tolerances differ by country, so Korean products should be read on the basis of Korean law and the packaging label.

Limits and scope of this guide

This article is based only on the Korean legal texts checked on 2026-11-19 (Enforcement Rule in force from 2024.12.5, public notice in force from 2024.4.1) and the overseas materials that were opened. Which side the minimum and maximum columns of Attached Table 13 of the public notice take for each item could not be confirmed, so it is not stated. The details of the calcium and phosphorus analysis methods, the tolerance figures of Attached Table 4 of the Feed Inspection Standards, the details of European notation, and US tolerances could not be confirmed. Individual animals' required amounts, illnesses and dietary judgments are not covered, and veterinary consultation is necessary. The detailed provisions on the guaranteed analysis (registered) in the revised public notice due to take effect in September 2028 could not be checked in the original text and were confirmed only through press reports. Laws may be revised.

Translated from the Korean edition · Editorial draft, not professionally reviewed. The Korean edition is an explainer newly written from public sources; it is not a full translation of those sources. Veterinary expert review has not been completed. For decisions about your pet's health, talk to a veterinarian who knows your pet.

Sources and check dates

  1. Enforcement Rule of the Control of Livestock and Fish Feed Act (사료관리법 시행규칙) ↗

    Used as the basis for the provision in Attached Table 4 that the guaranteed analysis (registered) is written as a percentage, with min. for a minimum amount and max. for a maximum amount.

  2. Standards and Specifications for Feeds (사료 등의 기준 및 규격) (MAFRA Public Notice No. 2024-27) ↗

    Used as the basis, in Attached Tables 13, 13-2, 15 and 25, for the companion-animal registered ingredient items, the permitted range of labeling, and the outline of proximate analysis methods.

  3. Labeling requirements (AAFCO Startups) ↗

    Used as the basis for the required items of the US guaranteed analysis (crude protein and crude fat min., crude fiber and moisture max.) and for the explanation that crude refers to the analytical method.

  4. Understanding Pet Food (AAFCO) ↗

    Used as the basis for the point that AAFCO does not regulate or approve feed and produces model wording.

  5. Dog and Cat Foods (Merck Veterinary Manual, professional version) ↗

    Used as the basis for the point that the guaranteed analysis is a limit value on an as-fed basis, the point that crude fiber measures only insoluble fiber, and the dry matter basis comparison example.

  6. Pet Food (FDA Animal & Veterinary) ↗

    Used as the basis for the explanation that US pet food labeling is at two levels, federal and state, and that states refer to the AAFCO model.

  7. Selecting a pet food / Global Nutrition Guidelines (WSAVA) ↗

    Used as the basis for the guidance that ingredient quality cannot be known from the ingredient list alone.

  8. Report on the 2-years-to-go point for the complete feed labeling standard for companion animals (반려동물 완전사료 표시기준 시행 D-2년 보도) ↗

    Used as the basis for the reported content that the guaranteed analysis (registered) is among the main labeling items in the revised dog and cat food labeling standard due to take effect in September 2028.

Korean edition checked · translated · each source may have a different check date. No paid partnerships.

This guide relies on 4 Korean laws or notices. Current effective dates and upcoming amendments are listed on Korean law check status. This is not legal advice.