Skip to content
Grochi · Neutral pet information from South Korea · English edition한국어
Grochi.English edition
Guaranteed analysis

Calcium to phosphorus ratio (Ca:P)

Korean label term: 칼슘·인 비율 · Calcium to Phosphorus Ratio (Ca:P) · Also called: calcium phosphorus ratio, Ca:P, Ca/P ratio, Ca:P ratio (short form)

Translated from the Korean edition · Editorial draft, not professionally reviewed. This page is an English translation of the Korean edition as checked on 2026-11-19. If the two differ, the Korean edition is the reference. 한국어판 (Korean edition)

Definition

The calcium to phosphorus ratio is the calcium content of a feed divided by its phosphorus content, an indicator of the balance of the two minerals, and it is usually not written directly on the package.

About Calcium to phosphorus ratio (Ca:P)

The calcium to phosphorus ratio (Ca:P) is the amount of calcium in a feed divided by the amount of phosphorus, expressed like "1.2 : 1". Calcium and phosphorus are both essential minerals and influence each other, so nutrient standards address the balance of the two as well as each amount. This ratio is not an item measured separately by analysis but a value calculated from two numbers.

In Korea, Appendix 13 of the notice Standards and Specifications for Feeds (사료 등의 기준 및 규격) sets crude protein, crude fat, calcium, phosphorus, crude fiber, crude ash and moisture as the registered components of compound feed for companion animals. Calcium and phosphorus are each registered, but no provision requiring the ratio of the two components itself to be registered or labeled was found in this notice. So on Korean packages, the ratio is generally obtained by the owner dividing the labeled calcium value by the labeled phosphorus value.

Overseas standards give a range for the ratio. The Merck Veterinary Manual gives the optimal calcium to phosphorus ratio for dogs as about 1.2–1.4 : 1, and states that the minimum and maximum ratio set by the Association of American Feed Control Officials (AAFCO) is 1 : 1 to 2.1 : 1. The same document explains that the phosphorus content of a feed is often set according to the calcium level, with the aim of matching the ratio suited to the species, size and life stage.

A calculation example (the numbers are invented for teaching and are not a real product). For a feed labeled with calcium 1.2% min. and phosphorus 1.0% min., 1.2 ÷ 1.0 = 1.2, so it is read as about 1.2 : 1. However, both values are minimum (min.) labels, so the actual content may be higher than this, and the calculated ratio is also an approximate value.

The fact that the ratio is within the range alone does not mean the feed suits an individual animal. The conditions needed differ with the total amount of calcium, life stage and body size. The Merck Veterinary Manual mentions a risk when calcium exceeds 3% on a dry matter basis during large-breed growth. Supplementing calcium or phosphorus separately is an area to discuss with a veterinarian.

How it appears on labels

Calcium to phosphorus ratio (Ca:P) on labels
On Korean labels등록성분량에 「칼슘 ○% 이상」「인 ○% 이상」이 각각 적히며, 비율은 보통 따로 표시되지 않는다. (Under the registered component amount, "calcium ○% min." and "phosphorus ○% min." are each written, and the ratio is usually not labeled separately.)
On English labelsCalcium and Phosphorus are sometimes written in the Guaranteed Analysis, and the Ca:P ratio is usually not labeled separately.
Unit / basisRatio (e.g., 1.2 : 1) · formula: calcium % ÷ phosphorus %

Which standard is it?

  • Korea: Appendix 13 of the notice Standards and Specifications for Feeds (사료 등의 기준 및 규격) sets calcium and phosphorus each as registered components of compound pet feed. No obligation to label the ratio of the two components was found in this document.
  • US AAFCO: the minimum and maximum calcium to phosphorus ratio is 1 : 1 to 2.1 : 1 (citing the Merck Veterinary Manual).
  • Veterinary nutrition literature: the optimal ratio for dogs is about 1.2–1.4 : 1 (Merck Veterinary Manual). The ratio standard of European FEDIAF could not be opened and checked this time.

Evidence level: Established — The AAFCO minimum and maximum ratio and the recommended ratio range for dogs appear in official nutrient standards and veterinary textbooks.

Common misconceptions

  • The calcium to phosphorus ratio is written on the package → On Korean labels the ratio is usually not written, and you calculate it yourself by dividing the labeled calcium value by the labeled phosphorus value.
  • As long as the ratio is right, any amount of calcium is fine → Apart from the ratio, the total amount also matters, and the literature mentions cases where the total calcium is a problem, such as during large-breed growth.

What to check on the label

  • Check that both calcium and phosphorus items are in the registered components and that they are labeled "min.".
  • Divide the calcium value by the phosphorus value to calculate the ratio, keeping in mind that it is an approximate value.
  • In special cases such as growing large-breed dogs, consult a veterinarian before changing the feed or adding supplements.

Related guides

Where was this checked?

Translated from the Korean edition · Editorial draft, not professionally reviewed. The Korean entry is an explainer newly written from these sources, not a full translation of them. Not a diagnosis, prescription or feeding instruction. Korean edition checked 2026-11-19 · no paid partnerships.

All glossary terms