Skip to content
Grochi · Neutral pet information from South Korea · English edition한국어
Grochi.English edition
Guaranteed analysis

Moisture

Korean label term: 수분 · Also called: moisture content, moisture rate, Moisture (max.)

Translated from the Korean edition · Editorial draft, not professionally reviewed. This page is an English translation of the Korean edition as checked on 2026-11-19. If the two differ, the Korean edition is the reference. 한국어판 (Korean edition)

Definition

Moisture is the percentage of water in a feed. On packages it is usually labeled as "○% max.", and it is the value used as a basis when comparing the nutrients of dry and wet feeds.

About Moisture

Moisture is the share of a feed's weight that is water. The other nutrient numbers of a feed are all written as percentages with this water included, that is, as fed, so you need to know the moisture to compare protein or fat numbers properly. When there is more moisture, the share of the remaining components at the same weight becomes smaller.

In Korea, Appendix 13 of the Ministry of Agriculture, Food and Rural Affairs (MAFRA) notice Standards and Specifications for Feeds (사료 등의 기준 및 규격) includes moisture among the registered components of compound feed for companion animals (pets) and sets moisture at 14% max. It states that when components are registered with moisture above the moisture limit, the reason and related materials must be submitted to the mayor or provincial governor (시·도지사), and the standards of Appendix 10-2 must be met. In other words, wet products and others with more than 14% moisture go through an exception procedure. On official Korean sales pages, moisture is observed to be written as max. (이하, a maximum).

US AAFCO includes a moisture maximum among the 4 required items of the guaranteed analysis. In its consumer guidance, AAFCO explains that wet feeds have lower calories per kilogram because they contain more moisture, and this is for the same reason.

The moisture number is the starting point for converting to a dry matter basis. The dry matter basis value of a nutrient is found by dividing the labeled value by (100 − moisture %) and multiplying by 100. A dry feed with about 10% moisture and a wet feed with 75 to 80% can have the same crude protein number yet very different actual shares, so conversion is necessary when comparing the two forms.

There is no basis for saying a feed is better because its moisture is low, or worse because it is high. Moisture is a value showing the difference in product form. Storage after opening and the risk of spoilage are related to moisture, and the notice's labeling provisions include a rule requiring compound feed with more than 14% moisture to carry a statement to refrigerate after opening or use quickly.

How it appears on labels

Moisture on labels
On Korean labels등록성분량 항목에 「수분 ○○% 이하」로 적힌다. (Written under the registered component amount heading as "moisture ○○% max.".)
On English labelsWritten in the Guaranteed Analysis as "Moisture (max.) ○○%".
Unit / basis% (percentage of weight) · maximum (max.)

Which standard is it?

  • Korea: Appendix 13 of the notice Standards and Specifications for Feeds (사료 등의 기준 및 규격) sets moisture in compound feed for companion animals at 14% max., and exceeding it requires submitting the reason and materials and meeting the standards of Appendix 10-2.
  • Korea: Appendix 15 of the notice requires compound feed with more than 14% moisture to carry a statement to the effect of refrigerating after opening or using quickly.
  • US AAFCO: a moisture maximum is stated as one of the 4 required items of the guaranteed analysis.

Common misconceptions

  • Moisture has nothing to do with a feed's nutrition → Moisture is the basis of all the other nutrient numbers, so it is essential for conversion when comparing feeds of different forms.
  • Only feed with 14% moisture or less is normal → 14% is the general registration standard for compound feed, and even when it is exceeded, registration is possible if the reason and materials are submitted and the standards of Appendix 10-2 are met.

What to check on the label

  • Check the labeled moisture value, and when comparing dry and wet feeds, convert to a dry matter basis.
  • For products with high moisture, check the after-opening storage statement and the sell-by date together.
  • The label is a maximum (max.), so keep in mind that actual moisture may be lower.

Related guides

Where was this checked?

Translated from the Korean edition · Editorial draft, not professionally reviewed. The Korean entry is an explainer newly written from these sources, not a full translation of them. Not a diagnosis, prescription or feeding instruction. Korean edition checked 2026-11-19 · no paid partnerships.

All glossary terms